Types of Hose Valve

A hose valve can be of various kinds. There are compression types and angle types. The compression type of hose valve seals the opening and stops the water from flowing. These types of valves are commonly used in the kitchen, bathroom, and laundry. They can be hard to find because they tend to degrade over time. These valves use two washers to protect against corrosion. The packing washer is a crescent wrench that fits tightly onto the spout.


An angle hose valve, also called a standpipe outlet, is a type of angle hose valve. It has taper pipe threads and meets ANSI B2.1 standards. Installation of this valve is easy and can be done with common field tools. A wrench and thread seal tape are required. The female end of the fire hose coupling is inserted into the female end of the angle nozzle. Once the fire hose is plugged into the valve, it opens to the desired pressure. Aside from the angle nozzle, a swivel hose flange is also required.


Firefighters need reliable water supplies to extinguish fires. These water supplies are usually provided by an external fire hydrant and pumped into a building through a connection to the fire department. This type of internal access valve provides a direct connection to water from inside the building and reduces the need for long hose lays in tall buildings. A swivel angle hose valve is a versatile device with many roles in a standpipe system.


An angle hose valve is made of brass with taper pipe threads and meets ANSI B2.1 standards. Installing the angle hose valve is easy with commonly available field tools. A wrench, joint compound, and thread seal tape are needed to install it. Once the angle hose valve is installed, the female end of the fire ring and coupling should be connected to the female end of the angle bibb. The valve will then open to the desired pressure.


A hose valve has a number of advantages. A swivel hose valve has a swivel design, while a lever-type hose valve is designed to prevent the hose from twisting. An angle cylinder is also a more affordable option than a standard straight swivel nozzle. A swivel hose bibb is an integral part of a standpipe system.


Firefighters need reliable water supplies to put out a fire. A fire hydrant is a common source of water for firefighting. Its connection allows firefighters to pump water into the building. Another internal access valve is the angle hose valve. The angle hose valve plays several roles in a standpipe system. It can be used for multiple types of nozzles. It can be used for a variety of different functions.