Brass angle valves are manual valves that control the flow of liquids or gasses through pipes

If you are interested in purchasing a Brass Angle Valve, then read on to find out how you can find it. There are many places that sell Brass Angle Valve products, including AV-200 2 in. FPT Brass Angle Valve with Cross Handle. 

The AV-200 Brass Angle Valves have an FPT of 2 inches and are made from rugged cast brass. These valves are sometimes known as globe valves and are used to stop and start water. They also have a stop and turn feature to help with irrigation applications. Aqualine is a renowned irrigation product provider and aspires to be the distributor's first choice in quality irrigation products.

Linquip RFQ Service

Brass angle valves are manual valves that control the flow of liquids or gasses through pipes. These valves are available in a variety of materials, but brass has the longest life and is one of the most reliable. The operation of these valves is one of the most important factors. Here is a look at how they operate and why brass is the best choice for angle valves. Let's start with the basic information about angle valves.

D&R Metal Industry

A brass angle valve is a vital plumbing accessory that has many uses. Often used in home renovations, angle valves are required on water heater inlet pipes, toilet tank inlet pipes, and tap water inlet pipe. These angle valves improve the quality of your life when installed properly. The brand's brass angle valves are made to last for 50,000 cycles and are available in light and heavy duty designs.

Brass has superior corrosion resistance compared to other metals, making it ideal for marine applications. However, some brass angle valves do not conform to the current Reduction of Lead in Drinking Water Act, which requires lead-free materials. For these reasons, it is highly recommended to use lead-free brass angle valves. This material is not only resistant to corrosion, but also has a lower lead content than bronze.

To replace a brass angle valve in a bathroom, you must first remove the existing one. You will need to replace the water supply line before you can install the new brass angle valve. You will also need a new compression sleeve and stem. You can clean the stem by using white vinegar, and then reattach the parts to the existing valve. Then, you're ready to install your new brass angle valve.